Tips For Replacing a Window Handle
It is simple to change your window handle in the convenience of your own home. Follow these guidelines to ensure an elegant and smooth finish.
Begin by removing the screws to expose the screws inside the uPVC window handle. Measure the spindle's length to ensure that you receive the right size replacement.
1. Determine the Spindle Length
It is crucial to have the right size spindle when replacing a window handle. This is because it can determine how tight or loose the handle is, and whether it's able to lock properly in the window frame. The spindle is a metal shaft that connects the handle to the lock in the window frame. The spindle could be an industry standard cross-section of 8mm or the older 9mm versions. Modern industry standards are 8mm but it wasn't always this way. It is crucial to confirm the measurements before purchasing the handle you want to purchase.
Remove the handle. This is done by turning the handle to the open position, and taking off two screws that keep the handle in place (which are often concealed behind plastic caps that will need to removed). After removal, take a measurement from the base of the handle to the end of the spindle. This will give you the measurement required to purchase a new one.
There are many options when it comes time to choose the right window handle. From sleek chrome that will fit into a modern home to traditional burnished bronze that looks great in restored Georgian rooms, or even the more quaint Tudor Cottages with curled mongoose-tail latches. The options are endless but the most important thing to do is choose a style that complements your home.
Espag handles are commonly installed to uPVC window frames and are always the exact same size, with a 43mm centre. Cockspur handles can vary between 58mm and 62mm however there are replacements for both sizes. Window handles from Cadenza come in a different size due to their angle blade that operates an interlocking mechanism that is multi-point inside the window.
Another consideration when selecting the best window handle is determining what hand you will need to use, which is defined by what hand you use to open the door. Inline espag handles are compatible with either left or right-handed windows. Cranked window handles are hand-operated and are only used on windows that open in one direction.
2. Remove the Handle
A window handle that is sagging can be a hassle, regardless of regardless of whether the handle has been damaged or worn out. The good news is that replacing a uPVC window handle is a very easy job that you can do yourself. You will require only a few basic hand tools and time to complete the process.
First, you must open the window, and ensure that it is not locked. The next step is to remove the screws which hold the handle in place. Once these caps are removed, you can begin working on removing the handle itself.
The handle is connected to a spindle inside the window frame. Depending on the type, this is held in place by a screw or pin. The most commonly used types of handles are inline Espagnolette handles and cockspur handles. Both kinds of handles are available on casement windows including aluminium ones. They can be locked by using keys to stop unauthorised opening of the window from outside, or you can lock them by turning the handle clockwise.
To take the handle off, you will need a flat-bladed screwdriver. Once the clip is released, the handle will be able to slide off the spindle. Once the old handle has been removed, you'll have to take a measurement of the length of the spindle to make sure that the new handle will fit.
Once you have the correct size, you can now put the new handle in the correct position. You will need to ensure that the new handle is securely attached and that it turns the correct way (clockwise for open, or counterclockwise for closed). It is also crucial to make sure that it is not installed upside down.
Replace the cap screws. After you've done this then you can test the handle to ensure that it is working correctly. You can also test the locking system by moving the handle from an unlocked position to the locked and then back.
3. Take the Screws off
A uPVC window handle is an essential element of any home and is often the first thing to exhibit signs of wear and wear and tear or damage. This could be due natural causes, frequent use or even intentional damage by criminals trying to gain access to your home. However, a simple replacement will solve the issue and prevent the issue from occurring again.
UPVC handles can also be difficult to remove when the locking mechanisms are not working correctly. It's usually possible to resolve the problem by replacing the multipoint locking mechanism, rather than the whole handle. This can save you money.
After you've removed the old handle, you'll need to take off the screws that were fixing it to the base. They're usually on the inside face of the handle base. You may require an screwdriver to do this, and it's important that you don't over tighten the screw as this could cause the handle to loosen.
You'll then have to find the fixing screws or pins that keep the new handle in the correct position. These are likely to be located on the inside face of the base of the handle and you will need to use either a screwdriver or pair of pliers to take them off the screws. If you'd like to replace them, you should replace the caps on the screw and check the handle to ensure it is working correctly.
When you're ready to install the new handle, simply line up the spindle with the cut-out in the window mechanism and screw in the right position. If you wish to replace the screw covers make sure that the handle is in an open position and that any screws are securely attached. Once this is complete you're all done and you can enjoy your newly replaced window handle. This should allow you to avoid costly window and door replacements in the future. Contact us if you need more information on this or any other aspect of your uPVC window.
4. Fit the New Handle
The process of replacing a broken window handle or updating it is easy and can be accomplished in only a few simple steps. Identifying the type of window handle, determining the length of its spindle and knowing the tools you'll require to complete the task are essential. Safety is always the primary priority when working with tools and windows. Be replacement door handles Repair My Windows And Doors to follow the steps and make sure that you have an appropriate handle to use.
To begin, find the screws that hold your window handle in place. Remove them while firmly holding the handle to prevent it from falling down and causing injury. Once the screws have been removed and repositioned, they can be put in a safe place to be replaced in the future.
After you have removed the handle, you can begin to put in your new one. It is essential that the handle fits perfectly so that it is functional and secures the window in place. The next step is to slide the square metal bar on the back of the handle into the hole in the window mechanism, making sure it is secure.
The final step is to replace the screws caps and then test the handle to ensure that it works. If you aren't satisfied with the outcome or if the window does not open and close as it should the next step is to call our experts who can assist you.
Almost all UK homes are equipped with uPVC Windows. Therefore, a large number of windows will need to be changed at some point due to wear and tear or breakage. The procedure is simple and can be completed by anyone with some knowledge of DIY. It is important that the handle you choose is in line with the style and size of the window. If you're not sure what kind of handle you'll need, feel free to reach out to our team, who will be able to provide you with the options available.